Sinocare ACR Analyzer

Metabolic Disease State

ICSIN00213

The PABA-1000 ACR Analyzer is intended to be used with the mALB/Cr Reagent Kit manufactured by Changsha Sinocare Inc. to quantitatively determine microalbuminuria, creatinine, and ACR (the ratio of microalbuminuria and creatinine) in the urine sample. It is for in vitro diagnostic use only. It is intended for prescription point-of-care use as an aid in the diagnosis of renal disease. PT Isotekindo Intertama is a distributor for Sinocare ACR Analyzer Products which is official and registered with the Ministry of Health.

Variant

Sinocare mALB/Cr Reagent Kit

Sample type

Urine

Reagent

mALB (MAU) / Creatinine test kit (fluorescence and Benedict-Behre Methods)

Language

English / simplified Chinese

Display

5-inch touch screen

Communication port

RS232，USB，RJ45

Power input

220V，50Hz，1.4A

Dimensions

380mm×240mm×254mm（L×W×H）

Net weight

6.5kg

Printer

Built-in thermal printer

Single test time

About 6 min

Data storage volume

2000 test and quality control data

Operational Altitude

Max 2000 m

Storage Condition

20 °C - 55 °C

Display Type

5-inch LCD touch screen, 800x480 pixels


FEATURE	BENEFIT
The ACR of the tested sample is determined by colorimetry (Cr) and fluorometry (mALB). When passing through the tested solution, one light beam is absorbed by Solution A, while another light beam excites the fluorescent substances in Solution B. The content of the tested substance, which is clinically significant, can be acquired by analyzing the amount of absorbed light or generated fluorescence	ACR Monitoring System consists of a PABA-1000 ACR analyzer, mALB/Cr Reagent Kit, and control solutions (level 1, level 2). The mALB/Cr Reagent Kit is intended to be used with the PABA-1000 ACR Analyzer to quantitatively determine microalbuminuria, creatinine, and ACR (the ratio of microalbuminuria and creatinine) in the urine sample
Short Measurement Time	Only need less than 7 minutes for each sample, so the operator will benefit from the time and effort
Sample testing using urine	The urine sample is relatively easier than blood samples in general, the test is relatively practical without any invasive action that causes the patient's pain sensation
Trusted Test Value Certification	Device and reagents have been certified as testing with conventional kidney function test methods will increase the level of patient and doctor confidence in the testing laboratory
There are 1 Reagent Type for 3 Parameters	With 3 parameters of kidney function, namely microalbumin (mAl), urinary creatinine, and albumin-creatinine ratio (ACR) in 1 reagent, the total cost of the examination is affordable and efficient
Able to connect with LIS or HIS	Reducing the potential for patient data errors, coupled with printable results directly from the device, ensures validation of test results
Large memory capacity	Able to store 2,000 test results in a system of tools so as to ensure that medical data is stored safely and monitored